Lens Cleaning Kit

Lens Cleaning Kit

Photography Online Learning explains how to clean a Digital Camera lens

How annoying it is when every image shows a spot in the same place, and you know it is due to a dirty lens. That s 'is why the picture of online learning is as important to avoid having to go through these nightmares.

If you 're shooting with a DSLR and start to notice dark spots that appear in the photos, don ' t get all out of breath: this ectoplasm is not caused by leaking from the spirit world. It 's just dust. When you change lenses in an SLR, dust can enter inside the chamber and are deposited on the sensor, dark specks in the photos you take.

Some cameras have a sensor-dusting function, but most require a careful manual cleaning.

1. Buy a self cleaning Slr Camera.

specks of dust on the camera sensor can cause dark spots in his photographs. A tip: when looking at the photographs they may have been extended in order to see the specks of dust.

There are two cameras have been built on the property to clean the sensor, the E1 and Evolt E-300, manufactured by Olympus. Every time you turn the camera on or activate the filter, Wave Filter Supersonic vibrates the sensor that shakes dust. These include adhesive strips moving along the sides of the sensor to gather dust. From my experience, the system works quite well. It 's unfortunate that other manufacturers don ' t offer something similar.

2. Clean your camera carefully. If you don 't have an Olympus SLR (or even if you do, but they are in a dusty environment), sooner or later 'll have to clean the sensor. If you 're nervous by doing it yourself, you can send to the manufacturer for a professional cleaning. However, that 's not a very practical or affordable to handle the situation each Once a small spot new sample. Although you should take the greatest care, the best solution is probably to clean the dust yourself.

Most sensors have a protective cover glass, and unfortunately if you scratch or damage, no s 'a good opportunity for the security of s does not cover manufacturer repairs. Try not to be casual what is put inside the chamber. One note: never blow compressed air into the chamber. The compressed air used thrusters can leave a residue and create a film on your sensor.

Use products that are made specifically for cleaning the sensor. A number of companies to take, including photographic Solutions and visible dust. Kinetronics Speck 'Grabber is useful for obtaining in particular the bits of debris, as it has a little light built in and Kodak sells its own Sensor Cleaning Kit and provides detailed instructions on how to clean your cameras sensor '.

When you have purchased your product and are willing to clean the sensor has to put the camera in sensor cleaning mode for the sensor is exposed (see manual on how to do this with your particular model) and remove the lens. Use must use a bulb blower to blow dust from the sensor (which will want to make sure you keep the camera so that the dust instead of settling falls inside again.) Carefully follow the instructions of the cleaning product that "I have chosen. This typically involves thoroughly cleaning the surface of the protective glass over the sensor.

To verify that you have gotten rid of all dust take a picture of a blank wall or a piece of paper. Look at full size on a computer monitor and see if you can detect particles remaining. See how online learning all digital photography is much simpler for you? About the Author

Did you enjoy this article? Would you like to know how you can begin
Learning Photography Online
with Photo Guru Dan Feildman. Download his FREE Digital Photography Report that will even help a complete beginner
Learn Digital Photography
with immediate results!

OAKLEY Lens Cleaning Kit の紹介