Loaded Kit

Loaded Kit
What wiring harness (s) need to install two amps in my car?

I have two 12 "alpine type r subs to 4 ohms and I get Alpine MRP-M500 two amplifiers for each sub and put in a 2 ohm load. But the problem is, what set of wires or kits of what I have to?

Why do you want 2 amps? You can run more than 1 sub on an amp. I guess the speakers are DVC to get your 2 ohms. To answer your question, you buy a wiring kit for 1000W. 1. Run a fused wire from the battery to the amplifier location. 2. Put a distribution block at the other end another cable. 3. Drive cables to each amplifier block. 4. Baja amplifiers in the frame or chassis. 5. Running an RCA cable from the head unit to the first 6 amps. Running a second cable from RCA first amplifier output to the input of the second. 7. REM run a cable from the main unit to the first stage. 8. Run a cable from the first amplifier to the second terminal REM REM terminal. 9. Connect the speakers as you want with the correct ohm rating you choose.

Gypsy Market Mini Album Kit – Introduced by Deux Shabby Chic!