Series Filters Holder

Series Filters Holder

Electro Valve – Italy sock knitting machine – Tantex Corporation

For all users of the solenoid valve:
A description of all our products:
Solenoid valve series are:

1. Direct operated solenoid valve differs from other types to their minimum dimensions, its specific design allows single or gang mounting in tight spaces.
2. Its high speed switching and the flow valve is suitable for different small fluids also applications that are not compatible with compressed air construction material.
3. All version, equipped with manual control, are 3 / 2 way NC, and N º, 2 / 2 way NC 12 or 24 DC voltage cables or connector also led.

Construction features:
Electric part:
Miniature solenoid is a coil of copper wire of different sizes depending on the strain isolated in accordance with F-class standards and implementation glass nylon injection molding. All parts that form the coating, the electrical connections and the pole pieces are protected against corrosion connection electrical connector is either directly with drivers

Mechanical part:
Nuclei AISI 430, AISI 304 return springs, NBR seals, the nylon body. Miniature solenoid valves are mounted on a different basis, the basis of multiple or distributors.

Operation
Series 10/15 valves: when the solenoid is energized, the core is removed from solenoid base subassembly, Important: When the solenoid is deactivated, the initial force of return for the kernel, developed by the spring, the pressure or weight, must exert a minimal force to overcome the remaining magnetic force created by the solenoid.

When the solenoid is energized, the disc holder assembly seats against the hole, when the solenoid is deactivated, the disc holder assembly back. Important: return the initial force to the disc or disc holder assembly, whether developed in the spring, the pressure or weight, must exert a minimal force to overcome the remaining magnetic force created by the solenoid.

Installation

Check the nameplate to the catalog number correct, the service and power forward solenoid to check the voltage and frequency.
Warning: electric risks accessibility of the live parts to prevent the possibility of death, serious injury or property damage, install the open-frame solenoid and housing.

Caution: To protect the solenoid valve or operator; install a screen or filter, suitable for service at the entrance, so close to the valve or the operator as possible, cleaned periodically depending on the conditions of service.

Temperature Limitations:
Maximum setting of the valve / fluid temperature is 50 degrees, minimum ambient temperature of the fluid is -5 Degrees.

Positioning:
This solenoid is designed to perform properly when mounted in any position, however, for life and optimal performance, the solenoid must be mounted vertically and upright to reduce the possibility of accumulation of foreign matter on the basis of solenoid sub-assembly area.

Wiring:
Wiring must comply with local code and National Electrical Code.
Caution: Applications cryogenic – solenoid cable insulation should not be subjected to cryogenic temperatures, adequate protection of lead wire and routing must be provided.

The installation of the solenoid valve:
solenoid valves can be mounted as a complete unit, the hardening is performed by a driver threw it into the basis of solenoid valves.

Solenoid temperature:
Standard solenoids are designed for continuous service when the solenoid is energized for a long period, the solenoid becomes hot and can play with the hand for a moment, it is a safe operating temperature.

Solenoid maintenance

1. Preventive maintenance
2. Keep the medium that flows when the solenoid operator or valve free of dirt and foreign material as possible.
3. While in the service, the solenoid operator or valve should be operated at least once a month to ensure open and close are incorrect.
4. Depending on the environment and service conditions, periodic inspection is necessary to replace the valves and damage the worm.

Cause of operation Print

1. Faulty Control Circuit: control of the facility by activating the solenoid, a metallic click signifies that the solenoid is operation, the absence of a click indicates loss of power supply, check for loose or blown fuses, open circuit or grounded solenoid broken wire or connection joint.
2. Solenoid Burned-Out: check solenoid valve open circuit, replace if necessary, Feeder verification, since it must be the same as specified, check the temperature and verify that the core is not jammed.

Low Voltage:
Check voltage between terminals of the solenoid, the voltage should be at least 85% of rated voltage.

Taken from: website target = "_blank" title = "Home Page"> Tantex Corporation

Doncloud
July 19, 2009

About the Author

Tantex Corporation

MASSA 72mm Filters Adapter Ring for Square P Series Filter Holder Camera Lens 2

eBay Logo  

Haida M10 Square Filter Kit Holder Adapter MC Red-Diamond 100 series ND GND CPL


Haida M10 Square Filter Kit Holder Adapter MC Red-Diamond 100 series ND GND CPL


$1,077.93


Kase KW100 wolverine series filters kit(Filter holder+GND+ND+Bag)


Kase KW100 wolverine series filters kit(Filter holder+GND+ND+Bag)


$899.00


Haida M10 Square Filter Kit Holder Adapter MC Red-Diamond 100 series ND GND CPL


Haida M10 Square Filter Kit Holder Adapter MC Red-Diamond 100 series ND GND CPL


$752.55


Kase KW100 wolverine series filters kit(Filter holder+GND+ND+Bag)


Kase KW100 wolverine series filters kit(Filter holder+GND+ND+Bag)


$699.00


kase k100 wolverine series high-end kit (holder+S GND+R GND+ND+HARD CASE)


kase k100 wolverine series high-end kit (holder+S GND+R GND+ND+HARD CASE)


$699.00


kase k100 wolverine series high-end kit (holder+S GND+R GND+ND+HARD CASE)


kase k100 wolverine series high-end kit (holder+S GND+R GND+ND+HARD CASE)


$694.13


kase k100 wolverine series high-end kit (holder+S GND+R GND+ND+HARD CASE)


kase k100 wolverine series high-end kit (holder+S GND+R GND+ND+HARD CASE)


$694.13


H&Y K-series 100mm Filter holder kit with MRC CPL+ND1000+Soft GND8+Reverse GND8


H&Y K-series 100mm Filter holder kit with MRC CPL+ND1000+Soft GND8+Reverse GND8


$594.00


Haida M10 Square Filter Kit Holder Adapter MC Red-Diamond 100 series ND GND CPL


Haida M10 Square Filter Kit Holder Adapter MC Red-Diamond 100 series ND GND CPL


$539.40


Haida M10 Square Filter Kit Holder Adapter MC Red-Diamond 100 series ND GND CPL


Haida M10 Square Filter Kit Holder Adapter MC Red-Diamond 100 series ND GND CPL


$539.40


H&Y K2 square filter holder K-series+MRC CPL+ND1000+SOFT GND8+Reverse GND8 set


H&Y K2 square filter holder K-series+MRC CPL+ND1000+SOFT GND8+Reverse GND8 set


$534.60


H&Y K2 square filter holder K-series+MRC CPL+ND1000+SOFT GND8+Reverse GND8 set


H&Y K2 square filter holder K-series+MRC CPL+ND1000+SOFT GND8+Reverse GND8 set


$534.60


H&Y K2 square filter holder K-series+MRC CPL+ND1000+SOFT GND8+Reverse GND8 set


H&Y K2 square filter holder K-series+MRC CPL+ND1000+SOFT GND8+Reverse GND8 set


$534.60


kase k100 wolverine series entry-level kit(holder+S GND+ND+HARD CASE)


kase k100 wolverine series entry-level kit(holder+S GND+ND+HARD CASE)


$508.41


kase k100 wolverine series entry-level kit(holder+S GND+ND+HARD CASE)


kase k100 wolverine series entry-level kit(holder+S GND+ND+HARD CASE)


$508.41


NiSi S5 150mm Filter Holder Kit with Enhanced Landscape NC CPL


NiSi S5 150mm Filter Holder Kit with Enhanced Landscape NC CPL


$499.99


Kase KW100 wolverine series filters kit(Filter holder+GND+ND+Bag)


Kase KW100 wolverine series filters kit(Filter holder+GND+ND+Bag)


$499.00


Kase KW100 wolverine series filters kit(Filter holder+GND+ND+Bag)


Kase KW100 wolverine series filters kit(Filter holder+GND+ND+Bag)


$499.00


Kase 100mm series Entry Level Filter Holder Kit with K100-K8+Soft GND8+ND1000


Kase 100mm series Entry Level Filter Holder Kit with K100-K8+Soft GND8+ND1000


$499.00


Kase 100mm series Entry Level Filter Holder Kit with K100-K8+Soft GND8+ND1000


Kase 100mm series Entry Level Filter Holder Kit with K100-K8+Soft GND8+ND1000


$499.00


Kase 100mm series Entry Level Filter Holder Kit with K100-K8+Soft GND8+ND1000


Kase 100mm series Entry Level Filter Holder Kit with K100-K8+Soft GND8+ND1000


$499.00


kase k100 wolverine series entry-level kit(holder+S GND+ND+HARD CASE)


kase k100 wolverine series entry-level kit(holder+S GND+ND+HARD CASE)


$499.00